Drilling string Design and inspection

    • Duration: 5 Days
    • Date: 18 – 22 Sep 2022
    • Type: Virtual

    About Course

    This course provides a comprehensive treatment of drill string design as well as the avoidance of operational problems and wear on equipment. BHA design concepts, optimization and drilling hydraulics are investigated, with the emphasis on practical and safe operating procedures. Industry standards are used as training aids to supplement the presentation material and provide a thorough understanding of drill string component operating limits and practices.

    Course Objective

    The course provides a comprehensive treatment of drill string design as well as the avoidance of operational problems and wear on equipment following the API recommended practices for design and operating limitations as well as the standard DS1 for design and inspection.

    BHA design concepts are investigated, with emphasis on practical engineering calculations and safe operating procedures. Industry standards are used as training aids to supplement the presentation material and provide a thorough understanding of drill string components, designs, operating limits, inspection and working practices.

    Audience

    • Drilling Engineers
    • Drilling Supervisors
    • Junior Directional Drillers
    • Senior Well Engineers
    • Tool Pushers

    Prerequisite

    Participants should be skilled in both drilling engineering and math. Participants must have a scientific calculator for use in the class.

    Agenda Day 1

    Steel And Submerged Tubulars

    • • • • •

    Introduction – pre-class test
    Mechanical Properties of Steel & Basic Concepts- Strength & Deformation
    Hook’s Law – Minimum Yield Stress – Maximum Yield Stress
    Buoyancy – Axial Forces and Buckling in Submerged Tubulars
    Introduction to API RP7G for Drill Stem Design and Operating Limits – DP Elements

    On the
    day will continue on to discuss topics such as the properties of steel, Hooke’s Law, and Thermal Stress. Participants will gain knowledge about axial forces and buckling in submerged tubulars, ending with a practical exercise.

    Day 2

    Drill Stem Design, Drill Pipe Specifications and Connections

    • Drillpipe Specs – Steel Grade – Tool Joints – Make-up Torque – Drillpipe Classification –

    Drillpipe Marking

    • Drillstring Tension Design based on Margin of Overpull and SCF
    • Collapse, Burst and Torsion Design

    Participants will have a detail analysis of the complete manufacture of Drill Pipe process will be reviewed including conections and make up torque. During the day multiple exercises will complement the theory part.

    Day 3

    Bottom Hole Assembly and Drillstring Dynamics

    • Bottom Hole Assembly (BHA) Selection and Design – Drill Collar and Heavy Weight Drill Pipe

    (HWDP) Specifications and properties – BHA Design Process

    • Bending Strength Ratio – Stiffness Ratio – Stress Relief Features
    • BHA Design for Directional Drilling Applications
    • Drillstring Dynamics

    BHA components, properties, design factors and limitation including a BHA applicability in directional wells, stabilization principles and effects of stiffness, formation Dip, hole washout and WOB. The day will end with a review of drillstring dynamics.

    Day 4

    Drill String Care and Inspection

    • Drill String Failures and Prevention – Group 1 and Group 2 DS Failures
    • Drill String Failure Prevention – Drill String Care and Inspection
    • Standard DS-1 Overview

    In the final day participants will learn about types of damage which may occur during operations and handling. Detail review of tables, curves and technical data of DS-1 will be followed by fatigue design, overload cases and class exercises.